
Home Canopy Kits Carport RV and Boat Canopies Outdoor Theater Projection Screen Low Peak Canopy 102 degree slope Medium Peak Canopy 110 degree slope Medium Peak Canopy with Valance Medium Peak Canopy with Tarp over 2 sides High Peak Canopy with Tarp over 2 sides Gambrel Style Canopy Sukkah Shelter Firewood Storage Rack Fittings Flat - 90 deg and straight Low Peak Gable- 102 deg Medium Peak Gable - 110 deg High Peak Gable - 120 deg PVC Fittings Green PVC Fittings Party Canopy Gambrel Canopy Tarps Super Heavy Duty Silver/White Tarp Silver Heavy Duty Sun Blocker Tarp Rip Stopper Gray/White Tarp White Heavy Duty Tarp Green Heavy Duty Tarp Flame Retardant White Tarp Clear Tarps Utility Grade Tarps Canvas Tarps Valance Tarps Valance Tarps with Rope Black Mesh Tarp- Sun Screen Green Mesh Tarp- Sun Screen Desert Mesh Tarp- Sun Screen Blue Mesh Tarp- Sun Screen Custom Mesh - Sun Screen Peak Drop Tarps (Gable End Cap) Accessories Bungee Ball Ties The Claw Anchor and Tie-Down Duckbill Anchor Auger Anchors Foot Pads Attachable Tee Tarp Grommets Tarp Grabber (Grommet) Tarp Repair Tape ZIP UP Zipper Spring Clamps Fabric Clips (Snap Clamp) Grip Clamp (use with Snap Clamps) S-Hooks Tarp Handler Rope Eye Screws The Hatch Zipper Door Examples Customer Photo Gallery Flat Roof Canopy Low Gable Peak Canopy (102 deg slope) Medium Gable Peak Canopy (110 deg slope) High Peak Canopy (120 deg) Gambrel Shelter (Dome Style) Dog Kennel Cover Outdoor Theater Projector Screen Firewood Rack Support About Us Contact Us Canopy Design Program Estimated shipping time Canopy Definitions Canopy Setup Instructions Measuring for replacement tarps UPS Shipment Tracking Sales and Return Policy Privacy Policy Specials

Setup Instructions for Frame Fitting with Tarp Canopy

Setting up your new Canopy is quick and Easy!

Place All roof pipes on the ground next to corresponding fittings as shown in illustration 1.
Connect all roof pipes and fittings as shown in illustrations 2 and 3.
Drape tarp over assembled roof frame, fastening corners onto the frame first using ball ties as shown in illustrations 5, 6, 7.
Once corners are fastened, place the ball ties through the grommet holes and loop around the pipe as shown in illustration 8.
Lift one side of the roof and insert leg poles into the fittings. Lift the opposite side of the roof and insert remaining leg poles.

Note: it is strongly recommended that all canopies be securely anchored down. Method of securing will vary depending on where the canopy is located. Foot pads are designed to be bolted down to wood or concrete surfaces and duck cable anchors or auger anchors are excellent for ground installations.